One of the most frequently asked questions we hear at VAPEDEX is how long it takes to set up one of our e-liquid machines. It takes the average vape shop owner about 15 minutes from start to finish. We have gone to great lengths to make setting up and using your machine as easy as possible.
We will not go through the entire set-up process in detail here, but we will outline some of the basics. Please note that the entire concept behind the e-liquid machine is one of ease-of-use. We want our machine to be as easy as possible for vape shop owners to set up and maintain. We want it to be equally easy for customers to use.
Unpacking Your VAPEDEX E-Liquid Machine
Before you can set up your e-liquid machine, you first have to unpack it. Your package will include the 10-bank VAPEDEX e-liquid sampling station along with:
- a compressor (sold separately) and connector
- 4 suction pads
- a set of 3 filters
- air piping
- 10 atomisers
- a T-bar.
All these parts are listed in the owner’s manual that comes with the machine. Please go through the parts inventory to make sure you are not missing anything. Assuming that everything is there (and it should be), you are ready to begin the set-up process.
Basic Set-Up Procedures
We have developed a step-by-step process for setting up your VAPEDEX e-liquid machine. The first step is to attach the exterior parts of the compressor. In this step, you will be working with the compressor unit, the rubber pads that go underneath, the compressor handle, and the silencer that guarantees your machine runs quietly. Once all the pieces are fixed, you will attach the fitting that connects the compressor to the enclosed piping.
The second step is to find a place for the sampling station itself. You should choose a location with a stable surface that is not likely to become unstable if bumped. You also need space for the compressor. The sampling station and compressor can be up to 5m apart, if necessary.
The next step is to connect the compressor to the sampling station by way of the piping. In this step, you will measuring and cutting the piping according to where you’ve positioned the two components. Remember, measure twice and cut once. We have explained the piping process in detail in the owner’s manual.
Once you have cut and measured the piping, you are going to connect the whole system. Piping connects the compressor to the air filters in the first leg of the system; separate piping connects the filters to the sampling station in the second leg.
Finally, you’re going to fill the tanks with the e-liquid you want customers to sample, connect the power cables, test the quick release pressure valve on the back of the compressor, and turn on the power. All that’s left at this point is to set the compressor pressure, check the power settings to make sure they are correct, and test the individual vaping banks to verify that they work.
You Get a Lot for a Little
We hope you are not intimidated by the set-up process described here. Setting up a VAPEDEX e-liquid machine is not as complicated as it sounds. If you can use a few basic hand tools and follow simple instructions, you’ll have your machine ready to go in no time at all. And once it is up and running, you will quickly understand just what this machine will do for your vaping business.
A VAPEDEX e-liquid machine gives you an awful lot for a comparatively small investment. The actual price you pay will be easily offset through increased e-liquid sales and less money being spent on individual e-cigarette devices for testing purposes. As for your investment of time, it is minimal. You can set up the machine in about 15 minutes. After that, maintenance is a matter of taking a moment or two to check the banks on a regular basis.
With just a small investment of time and money, our e-liquid sampling station gives you a way to offer e-liquid samples to your customers without having to force them to share mouthpieces and atomisers. Our system of using compressed air to generate a vapour cloud that doesn’t require customers to draw with their mouths is what makes the VAPEDEX system the most hygienic way to sample e-liquid.
Consider VAPEDEX for Your Shop
If your vape shop is not yet equipped with a VAPEDEX machine, what’s holding you back? You already know that your customers want the ability to sample new liquids before they buy, and using individual e-cigarette devices to facilitate that is the old-fashioned way of doing things. The new, modern, and clean way to sample e-liquids is with our revolutionary machine.
Please do not hesitate to get in touch with us for more information about cost, renting versus buying, or how the e-liquid machine actually works. And if you have already purchased one for your shop, we are always available to offer whatever support you need.
Remember, setting up your VAPEDEX e-liquid machine only takes a few minutes. We have made the process as simple as possible thanks to a brilliant design and a detailed owner’s manual that shows you everything you need to know in text and pictures. Order your VAPEDEX machine today and start reaping the benefits of easy, hygienic e-liquid sampling.